Opis

Funkcije

• AC/DC TIG welding -A alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum, copper and many more.
• 2 in 1 combination unit – TIG & MMA welding is possible up to 200A.
• Extensive pulse function – TIG PULS – prevents materials from burning through and reduces deformation due to heat, especially suitable for welding thin plates whose material may be heated only slightly. Adjustable parameters are: Pulse current, pulse width, pulse frequency, long and short pulse.
• IGBT technology – The newest and most advanced transistor technology enables high performance welding! No transformer, no MOSFET, state-of-the-art IGBT!
• Lightweight & compact design – only 12.9 kg weight and dimensions of 455 x 220 x 370 mm. Inovative IGBT transistors save space and weight compared to old MOSFET technology. No more heavy carrying!
• HF ignition – enables non-contact ignition and provides much better welding results. No LIFT ARC, no strike ignition!
• Highest Efficiency & Power – Single phase AC power (230V) powers the unit and allows output power of true 200 amps.

Karakteristike i prednosti

• 2T/4T (TIG) – determines mode control and provides advanced control over current flow. In 2T mode, high frequency (HF) ignition remains active until the button on the torch is released. In 4T mode, pressing and releasing the button once ignites the arc. After pressing and releasing again, the ignition is terminated. Some functions such as current decrease are only possible in 4T.
• Current increase/decrease – prevents the formation of shrink marks (end craters) at the end of the weld.
• Gas follow-up (TIG) – protects the tungsten electrode from excessive wear and protects the weld seam from oxidation. The parameter can be set individually and separately. It specifies how long gas should flow after ignition.
• Smart cooling & overheating protection – State-of-the-art technology, integrated overheating protection and high-performance cooling enable maximum power to be retrieved.
• Innovative hose package including modified WP-26 torch with flex head. The welding current is regulated by means of an adjustment wheel installed directly on the torch. The torch is connected to the hose package via a ball joint. This enables flexible and easy working.
• AC-Balance – is a variable setting between breaking the oxide layer (-) and a deeper firing (+). This helps to act on properties of different materials and alloys.
• Remote regulation via torch or pedal – the welding current can be conveniently adjusted at any time using the rotary control mounted on the torch. Alternatively, the welding current can also be regulated with our optionally available foot pedal.
• Welding current / pulse current – Using the two buttons „Welding current“ and „Pulse current“, you can set two different current strengths for a welding process, between which the welding current then always alternates.
• Pulse width – The pulse width is used to set how long the welding current assumes the current strength of the pulse current before it swings back to the normal welding current strength.
• Pulse Frequency – The pulse frequency sets how often the current intensity alternates between the two set values in a specified time interval.
• Longpulse – The weld becomes wider, the heat input is higher and the penetration is deeper.
• Shortpuls – The weld pool is easier to control and there is less risk of welding a hole in the plate.
• Foot pedal – Remote current control via foot pedal (not included). The foot control mode gives you the advantage of being able to control the current even during the welding process, giving you different options for performing the welding work. The maximum current is set on the device. The foot pedal is set to 10. When the foot pedal is depressed, the unit ignites with a lower current than is shown on the display. As soon as the foot pedal is fully depressed, the set maximum current is reached. The value on the display does not change during this time. Examples:
• Maximum current display: 100A / ignition current through pedal: approx. 40A
• Maximum current display: 150A / ignition current by pedal: approx. 80A
• Maximum current display: 200A / ignition current through pedal: approx. 110A
• Hotstart – Automatic voltage increase at start for better ignition results.
• Anti-Stick – Automatic decrease of welding current when electrode sticks, allowing easy removal.
  
• TIG (Tungsten Inert Gas) – Shielded arc welding with inert/inactive gases such as Argon 4.6 (99.996%). An arc is created between the tungsten electrode and the workpiece in an argon bell. This melts the material and any filler material added. A weld seam is formed.
• MMA electrode welding / ARC welding – a universal welding process. An arc causes the electrode to melt, forming the weld. No shielding gas is required, making it flexible to use in any location.

Notice: The unit is not intended for use in residential areas where power is supplied by a public low-voltage power system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

Tehnička specifikacija